INTAKE or EXHAUST first? - Page 2

acwo · 10-29-2009, 12:46 AM

intake

MBRP Tech 1 · 10-29-2009, 11:12 AM

Quote:

Originally Posted by schardbody

3000+ rpm is midrange in my opinion. off idle to 3000rpm i would almost put money on it that your exhaust systems hurt torque.

If you take a real close look at that dyno chart again you will see the stock HP line dipping under 3000RPM and our line is pretty consistent. If we were able to start the dyno runs at a lower RPM while still holding the gear we would have. The truck will shift at anything under 2900RPM so the dyno results are no good...

You are correct that many after market exhaust systems and universal mufflers will likely do more bad than good, but our system is different. How many companies design a muffler and tune it specifically for these motors?

MBRP Tech 1 · 10-29-2009, 11:14 AM

EDIT: Double post...

Loud Z85 · 01-20-2010, 11:31 AM

Quote:

Originally Posted by schardbody

just sucks driving quietly.

Amen to that!!
I love when people hear me!

**1BADI5** · 01-20-2010, 11:33 AM

Quote:

Originally Posted by 1BADI5

Exhuast first.

No point in breathing better if you can exhale.

Repeat! Still same thought!

xkmacx86 · 01-20-2010, 11:53 AM

it's purely up to you bro. i built my intake and it's louder than the exhaust at half throttle to WOT
check out this vid. it's my intake that i made on another members truck

**1BADI5** · 01-20-2010, 11:55 AM

Quote:

Originally Posted by xkmacx86

it's purely up to you bro. i built my intake and it's louder than the exhaust at half throttle to WOT
check out this vid. it's my intake that i made on another members truck

Damn that fucker pulls pretty good!

I miss my truck right now!

xkmacx86 · 01-20-2010, 11:59 AM

you can hear my truck well over a half mile away at wot no matter the exhaust. I've built 6 intaked and all users love the sound. it dont matter cherry bomb, flowmaster, magnaflow, stock, they cant hear it over the intake

**1BADI5** · 01-20-2010, 12:02 PM

You got some pics of them?

I bought my AEM intake and Gibson exhuast together back in early 05!

xkmacx86 · 01-20-2010, 12:20 PM

one of the first intakes i made

here's my current setup

**1BADI5** · 01-20-2010, 12:29 PM

Nice man! Looks like it gets the job done!

xkmacx86 · 01-20-2010, 12:37 PM

no codes better milage (if you keep your foot out of it) and louder than hell.

**1BADI5** · 01-20-2010, 12:38 PM

Yeah same thing with my AEM too!

But I bet you paid less for yours; so nice work!

xkmacx86 · 01-20-2010, 12:38 PM

yeah i'm offering them to the local guys for $75 no filter

**1BADI5** · 01-20-2010, 12:39 PM

Yeah thats a steal. You can get the AEM filter for under 50 bux too!

xkmacx86 · 01-20-2010, 12:41 PM

yep it'll fit any drop in style filter. or one with an ID of 3.5in

**1BADI5** · 01-20-2010, 12:49 PM

Well thats pretty easy!

Tanner Cruise · 03-17-2010, 10:09 PM

Nice setup, went to my local Home Depot to check to see if they had similar pipe.
The guys there said that my store is "a smaller store" so they have up to 2" but not any bigger. I'll keep looking.

xkmacx86 · 03-18-2010, 02:48 AM

well if youre looking to do an intake like mine home depot no longer sells the exact tube that i use. youll need a sched 80 3in 90 deg sweep at 24in radius. if you merely want to delete the resonater you can get a 45deg 24in rad sched 40 3in tube which home depot might sell.

10-29-2009, 12:46 AM	#21
acwo Nation Affiliate Join Date: Aug 2009 Location: chihuahua, mexico Posts: 118 Member's Picture Albums	Re: INTAKE or EXHAUST first? intake

10-29-2009, 11:14 AM	#23
MBRP Tech 1 MBRP Site Sponsor Join Date: Jun 2009 Location: Huntsville Posts: 313	Re: INTAKE or EXHAUST first? EDIT: Double post... __________________ Steve Nairn Sales and Tech Support Phone 1-888-636-7223 ext. 202 E-mail snairn@mbrp.com Web www.mbrp.com JOIN NEW FACEBOOK GROUP: MBRP Performance Exhaust

01-20-2010, 11:53 AM	#26
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? it's purely up to you bro. i built my intake and it's louder than the exhaust at half throttle to WOT check out this vid. it's my intake that i made on another members truck __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 11:59 AM	#28
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? you can hear my truck well over a half mile away at wot no matter the exhaust. I've built 6 intaked and all users love the sound. it dont matter cherry bomb, flowmaster, magnaflow, stock, they cant hear it over the intake __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 12:02 PM	#29
1BADI5 Global Moderator/MTS Crew Join Date: Jul 2007 Location: South Korea/Maryland Posts: 17,413 Member's Picture Albums	Re: INTAKE or EXHAUST first? You got some pics of them? I bought my AEM intake and Gibson exhuast together back in early 05! __________________ Join the CAPITAL CHAPTER! PM Chris0nllyn, Downtime Designs or 1BADI5 Notice, Capital Chapter covers VA, DC, MD, DE, southern PA.

01-20-2010, 12:20 PM	#30
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? one of the first intakes i made here's my current setup __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 12:29 PM	#31
1BADI5 Global Moderator/MTS Crew Join Date: Jul 2007 Location: South Korea/Maryland Posts: 17,413 Member's Picture Albums	Re: INTAKE or EXHAUST first? Nice man! Looks like it gets the job done! __________________ Join the CAPITAL CHAPTER! PM Chris0nllyn, Downtime Designs or 1BADI5 Notice, Capital Chapter covers VA, DC, MD, DE, southern PA.

01-20-2010, 12:37 PM	#32
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? no codes better milage (if you keep your foot out of it) and louder than hell. __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 12:38 PM	#33
1BADI5 Global Moderator/MTS Crew Join Date: Jul 2007 Location: South Korea/Maryland Posts: 17,413 Member's Picture Albums	Re: INTAKE or EXHAUST first? Yeah same thing with my AEM too! But I bet you paid less for yours; so nice work! __________________ Join the CAPITAL CHAPTER! PM Chris0nllyn, Downtime Designs or 1BADI5 Notice, Capital Chapter covers VA, DC, MD, DE, southern PA.

01-20-2010, 12:38 PM	#34
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? yeah i'm offering them to the local guys for $75 no filter __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 12:39 PM	#35
1BADI5 Global Moderator/MTS Crew Join Date: Jul 2007 Location: South Korea/Maryland Posts: 17,413 Member's Picture Albums	Re: INTAKE or EXHAUST first? Yeah thats a steal. You can get the AEM filter for under 50 bux too! __________________ Join the CAPITAL CHAPTER! PM Chris0nllyn, Downtime Designs or 1BADI5 Notice, Capital Chapter covers VA, DC, MD, DE, southern PA.

01-20-2010, 12:41 PM	#36
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? yep it'll fit any drop in style filter. or one with an ID of 3.5in __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

01-20-2010, 12:49 PM	#37
1BADI5 Global Moderator/MTS Crew Join Date: Jul 2007 Location: South Korea/Maryland Posts: 17,413 Member's Picture Albums	Re: INTAKE or EXHAUST first? Well thats pretty easy! __________________ Join the CAPITAL CHAPTER! PM Chris0nllyn, Downtime Designs or 1BADI5 Notice, Capital Chapter covers VA, DC, MD, DE, southern PA.

03-17-2010, 10:09 PM	#38
Tanner Cruise New To The Nation Join Date: Mar 2010 Location: Campbell River BC Posts: 54 Member's Picture Albums	Re: INTAKE or EXHAUST first? Nice setup, went to my local Home Depot to check to see if they had similar pipe. The guys there said that my store is "a smaller store" so they have up to 2" but not any bigger. I'll keep looking.

03-18-2010, 02:48 AM	#39
xkmacx86 Nation Affiliate Join Date: Mar 2008 Location: Anaheim Hills, SOCAL Posts: 1,306 Member's Picture Albums	Re: INTAKE or EXHAUST first? well if youre looking to do an intake like mine home depot no longer sells the exact tube that i use. youll need a sched 80 3in 90 deg sweep at 24in radius. if you merely want to delete the resonater you can get a 45deg 24in rad sched 40 3in tube which home depot might sell. __________________ http://www.socal355.com '04 FSB Coly Crew Z71 4" T/B crank, 3in Fabtech spindles 2.5" CST AAL, 2"shackles, 2" B/L, 33x1150-17's Toyo Open Country Mud's JVC 7" screen Sirius/camera, 2 JL 10in W1's. 4 HID's 55w 8000k K&N custom intake, Corvette Servo,ASK ME ABOUT MY CUSTOM HEADER!!!! Magnaflow dumped ^^^^^^^^^^^^^^^^^^^Chops by The Rel^^^^^^^^^^^^^^^^^^^^

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode