Rainbow happy fun time f/i trash talk

[blk2006]

Holy shit almost pulled a Mike!!!! Lol, so apparently, when you don't actually cut a hole to feed the wg from the manifold, overboost is quick!! Thank god my timing was low, and my ebc kicked in, set overboost @ 18lbs and it still hit 24.3lbs. I'm hoping that's what it is, and not wg placement, guess ill find out after this crazy monster storm they're calling for goes through. 4wd + 12in of snow should = fun

[olds88]

Originally Posted by blk2006

Holy shit almost pulled a Mike!!!! Lol, so apparently, when you don't actually cut a hole to feed the wg from the manifold, overboost is quick!! Thank god my timing was low, and my ebc kicked in, set overboost @ 18lbs and it still hit 24.3lbs. I'm hoping that's what it is, and not wg placement, guess ill find out after this crazy monster storm they're calling for goes through. 4wd + 12in of snow should = fun

video or

[05_quick4door]

thats what happens when you work at 3:30 in the morning lol

[emaxxer]

Originally Posted by 05_quick4door

thats what happens when you work at 3:30 in the morning lol

And drunk.

[Karlen]

Can't say i am surprised

[blk2006]

Lol, and yet i still didnt pop the engine

[blk2006]

Originally Posted by olds88

video or

Make more than 250hp or

[emaxxer]

Originally Posted by blk2006

Make more than 250hp or

You can go lower to about 180 whp..... You give him too much credit.

[AceX]

Doesn't matter. I'm the slowest here, besides ed-flip.

[05_quick4door]

i cant even push my truck because the diff is welded. i think that makes me last

[blk2006]

I've acquired a fuckin tweeker ecu that has an awesome surging issue at idle for the first min. First start of the day. I've got a feeling its either my tb needs replaced, or its time to put the maf in the charge pipe, because the p12 is retarded and doesn't like its load table split in half.

[05_quick4door]

Ningy star!!!

[blk2006]

Originally Posted by 05_quick4door

Ningy star!!!

Lol, so you did find the most integral part to the wb in the box?

[GMCanyonL76]

Originally Posted by AceX

Doesn't matter. I'm the slowest here, besides ed-flip.

Originally Posted by 05_quick4door

i cant even push my truck because the diff is welded. i think that makes me last

Originally Posted by blk2006

I've acquired a fuckin tweeker ecu that has an awesome surging issue at idle for the first min. First start of the day. I've got a feeling its either my tb needs replaced, or its time to put the maf in the charge pipe, because the p12 is retarded and doesn't like its load table split in half.

Yall competing for slowest fi? Just figured id trash talk some I dont see kalen around. Haha. Jk guys I got props for yall boost guys.

[blk2006]

Originally Posted by GMCanyonL76

Yall competing for slowest fi? Just figured id trash talk some I dont see kalen around. Haha. Jk guys I got props for yall boost guys.

Well i used a whole 1lbs carb choke cleaner can to find a vacuum leak and no luck, once i get some time ill do a leak down test, but there's gotta be a mechanical issue for it to pop up right after i hit 24lbs boost on a run. Oh well, if it did give me new found blow by, ill just bite the bullet and watch the toy account balance cease to exist. Mmmmmm built 4200......

[GMCanyonL76]

So wat is happening? Wastegate not working right and letting it spike?

[blk2006]

Originally Posted by GMCanyonL76

So wat is happening? Wastegate not working right and letting it spike?

You quoted what was wrong:banghead:

[05_quick4door]

He's to drunk at 3am. "Where's my hole saw - screw it I'm coming in hot without it"

[blk2006]

Originally Posted by 05_quick4door

He's to drunk at 3am. "Where's my hole saw - screw it I'm coming in hot without it"

Lol, i wasn't drinking when i put it together, just when i was welding the manifold up. That's where the issue was

[FixxxerKH202]

who doesn't need 20lbs of boost while decelerating?