2.9 -- 4 cyl racing 1/8 mile ( video )

[no friends at 200mph]

He Here is one of the other side showing shifter and e brake.

[no friends at 200mph]

This is a pic of the corvette motor mount hooked to pfadt eng. that will hook to the frame. Pic also of a lightened motor mount versus stock.

[no friends at 200mph]

[jesse2005]

Originally Posted by no friends at 200mph

He Here is one of the other side showing shifter and e brake.

Now we need a picture of Roy in it again to see the difference.

Great work Mark.

[no friends at 200mph]

Originally Posted by jesse2005

Now we need a picture of Roy in it again to see the difference.

Great work Mark.

Roy might be the only one to drive it cause once the 8 is in ill be scared for his life! Had a jeep comanchee stadium race truck that was also streetable. Was driving it from tuscon to san diego and needless to say, worked all day and drove home after stopping by a marine that was shipping out had a beer and left his house. Picked up a monster eng drink to get back awake and woke up in emergncy room. The cops told ambulance driver the truck had rolled several times. NOT! The truck was completely destroyed pieces laying everywhere. But thats how i built it baby!!! I was safe in my cocoon (cab). Hey jess did my fist c- notch YEAH!!!

[royrjs]

Originally Posted by no friends at 200mph

Roy might be the only one to drive it cause once the 8 is in ill be scared for his life!

After going through whoops @ 70mph....... I think I'm ready, baby!!

2012-11-04_15-53-12_799.mp4 video by lirryeti | Photobucket

[xkmacx86]

This many be the roy but have you but a corner 80?

[no friends at 200mph]

Rear fenders reg cab 74". crew cab i believe 64'' long. Cut these back to 68" once fitted maybe cut another 2" for a total of 66". Have to make room for the radiator back there.

[no friends at 200mph]

Pulling wires to the front. Battery use to be in front of rear pass tire, now behind rear pass inside of frame rail. Once the rear is put back together need to do a run down the track with the 4 popper.

[slicksteveo13]

Damn looking good going to have to pay you a visit and check that out in person

[no friends at 200mph]

Your ucas look sweet steve good job. Great thinking on your jig, its the right way to do it. Just trying to distribute the trucks weight evenly at all 4 corners for better handling.

[slicksteveo13]

thanks ya i like the way they came out...very interested to see how yours will be finished...

[no friends at 200mph]

I told the nation id post some time slips i keeps my word. Ramona has a track thats the closest or qualcom stadium for back up. Doing alot of r&d on what works on these trucks. Then its off to the front end for the 8 and pull in out all the stops.

[no friends at 200mph]

Originally Posted by no friends at 200mph

Your ucas look sweet steve good job. Great thinking on your jig, its the right way to do it. Just trying to distribute the trucks weight evenly at all 4 corners for better handling.

Steve is your ucas like kevins (mcnchese)? I would like to make an aluminum pair of ucas and the lcas. Im testing diff strenghts of aluminum. Ive been trading out steel for aluminum, we'll see how it goes.

[slicksteveo13]

Originally Posted by no friends at 200mph

Steve is your ucas like kevins (mcnchese)? I would like to make an aluminum pair of ucas and the lcas. Im testing diff strenghts of aluminum. Ive been trading out steel for aluminum, we'll see how it goes.

Ya mine just like his just for our z85 trucks...I could bring the jig down to you if you need to....

[no friends at 200mph]

Originally Posted by slicksteveo13

Ya mine just like his just for our z85 trucks...I could bring the jig down to you if you need to....

Didnt you make the arms a little longer for the travel? The width would be fine! Well meet up soon.

[slicksteveo13]

Ya mine are 1/2 in longer its an easy fix on the jig

[no friends at 200mph]

Originally Posted by slicksteveo13

Ya mine are 1/2 in longer its an easy fix on the jig

Thanks see you tmorrow! J.k. Thanks well see ya soon!

[slicksteveo13]

Originally Posted by no friends at 200mph

Thanks see you tmorrow! J.k. Thanks well see ya soon!

Well figure something soon next couple weeks busy this weekend maybe next

[no friends at 200mph]

At the stables of Turn-key today for parts and found this here sweet ride. Turbo makin 700+ horses with the rail tires and 800 with 37" tires.