The Sfa_Colorado Overhaul!!!!!! New mod!! 1/23

[Sfa_Colorado]

To start off this is going to be the biggest OVERHAUL yet!!!!
And here are the steps and pics will come! And shout out for my buddy Chad at Ride Offroad the true master fabricator with out him this overhaul wouldn't happen!!!!

THINGS IN RED I HAVE

1. Build new frame with 3 link front and 4 link rear. (frame ordered)

2.Custom HP pass drop Dana 60 and Dana 60 rear

3. 40x14.50x17 inch tires most likely Iroks
4. Dana 300 twin stick 4:1 ratio

5. Front and rear Bumpers custom made tied in with rock sliders 12000 pound winch
6. Custom spare tire mount in bed of truck
7. Repainted, underbelly and frame coated with rhino line or some other
8. Roll cage inside no exo

9. 4 racing seat and harness
10. Floor rhino lined
11. And other do dads an small things lol
12.350 motor with th400 with shift kit and adapter for Dana 300


Others
????????????????
Open to suggestions!!!!!!!!

The most resent mod... Dana 300 in the truck

You can use all stock xmembers but one unless you run a 2 piece shaft in the rear and can use stock T-case mount/bracket with a little fab

[onelow1ton]

Holy S*** in for this

[FixxxerKH202]

Rockwells and 50's



No BALLS

[Sfa_Colorado]

Originally Posted by FixxxerKH202

Rockwells and 50's



No BALLS

Lol yep not happening I still want the truck some what streetable and I have a 91 exo'd cherokee that the Rockwells and 44s r going on lol I will post pics of the 91 here it's beat to hell but wheels awesome I have 37s on it right now lol

[Racer X]

Monster winch for when you get stuck.....

[Sfa_Colorado]

Originally Posted by Racer X

Monster winch for when you get stuck.....

Good call !!!!!! Lol brain fart

[Racer X]

Originally Posted by Sfa_Colorado

Lol yep not happening I still want the truck some what streetable

And you plan on building a frame?Why not get another stocker from a wrecker then?Easier to keep it legal than building your own...

[Sfa_Colorado]

Originally Posted by Racer X

And you plan on building a frame?Why not get another stocker from a wrecker then?Easier to keep it legal than building your own...

Still a possibility if I find one near but I still have the possibility of bending it again.... Even boxing the dang thing I bent the frame

[Sfa_Colorado]

I found a stocker the closest was in NC

[Racer X]

What did you do to bend the frame?

[Sfa_Colorado]

About 3 foot of air and leaf springs puts way tomuch stress on the front of the frame!!! And racer if u r not careful u to may damage your frame One heavy hit on a hidden under the mud ledge will hurt!!!!

[M_O_Z]

Some of us don't RAM the mud holes

[Racer X]

Originally Posted by Sfa_Colorado

About 3 foot of air and leaf springs puts way tomuch stress on the front of the frame!!! And racer if u r not careful u to may damage your frame One heavy hit on a hidden under the mud ledge will hurt!!!!

I stay off the gas offroading this thing unless its the only way to get thru.I usually hear the stories of what lies where when I go out.

[1BADI5]

That Jeep is wicked....seems like its seen some days on the trail for sure!

[Racer X]

Not a straight body panel on it but the cage has lasted.

[Sfa_Colorado]

Lol I love it and yes it is the roll over king lol ..... Ok maybe I do it on purpose

[DirtyBoy]

Originally Posted by M_O_Z

Some of us don't RAM the mud holes

[M_O_Z]

I enter into a mud pit slowly then give her throttle as she needs it then when exiting give her hell to coat the bitch

[wh1pple]

Originally Posted by DirtyBoy

[Sfa_Colorado]

Bump updated list with some pics