Headers

[PureNoSideHate]

Getting new Headers... Came across the Doug Thorley Headers. Looks like what I'm gonna get. Says it fit's 09-10. I have a 2012 there is no difference. But just wondering if anyone had any thoughts on another set to look check out. Or just go ahead and order these bad boys?

[olds88]

there is another but he got band for rippin people off

[keebler1400]

Is it four wheel drive? And I assume V8.

Sent from my DROID BIONIC using AutoGuide.Com Free App

[onelow1ton]

He has 2wd and that's what the Doug -T headers were designed for , I have them on my 4x4 and love them they have been on almost a year , been four wheeling and they look like new still I highly recommend them but trash the clamps they send and get the ones that are a band that overlaps the joints

[keebler1400]

I was told the Doug thorley ones weren't compatible with the 4x4... was I lied to? I really wanted them. I heard they really wale up the 5.3

Sent from my DROID BIONIC using AutoGuide.Com Free App

[keebler1400]

Wake up*

Sent from my DROID BIONIC using AutoGuide.Com Free App

[onelow1ton]

No you were not lied to they do and don't fit , the way they sell them no they don't but if you hammer a dent/flat spot in the short connector tube on the pass side right above the t-bar they will then fit that is all I did to mine and I love them

[keebler1400]

You wouldn't happen to have an actual number or estimate how much torque/power you gain with them?

Sent from my DROID BIONIC using AutoGuide.Com Free App

[keebler1400]

Or a video or sound clip from your exhaust? Is it otherwise stock?

Sent from my DROID BIONIC using AutoGuide.Com Free App

[olds88]

that guy has offroad vids that will make you bust a nut lol

[onelow1ton]

Originally Posted by keebler1400

You wouldn't happen to have an actual number or estimate how much torque/power you gain with them?

Sent from my DROID BIONIC using AutoGuide.Com Free App

I think they have the numbers on there some where but my iPad is not letting me see ll of the text

HEADERS CERAMIC at Doug Thorley Headers dougthorleyheaders.com

Originally Posted by keebler1400

Or a video or sound clip from your exhaust? Is it otherwise stock?

Sent from my DROID BIONIC using AutoGuide.Com Free App

Search onelow1ton on YouTube I have a few vids of the truck so you can hear the exhaust ( mbrp) and headers and tire noises

Originally Posted by olds88

that guy has offroad vids that will make you bust a nut lol

Lol the only good vid is not mine but I'm in it
But if you search TECORE 6 - offroadTB.com on YouTube you will see it , it's when I went out with one of the ortb guys

[PureNoSideHate]

For your video, sound, and spec needs... haha

HEADERS CERAMIC TRI-Y LONG TUBE HEADER 2009-2010 CHEVY COLORADO/GMC CANYON, 5.3L at Doug Thorley Headers dougthorleyheaders.com

[PureNoSideHate]

So you're saying there is no other way to avoid that? I'm gonna have to Flatten an area down to get them in?

Originally Posted by onelow1ton

No you were not lied to they do and don't fit , the way they sell them no they don't but if you hammer a dent/flat spot in the short connector tube on the pass side right above the t-bar they will then fit that is all I did to mine and I love them

[Kraco5]

Yea, I'd like to see the numbers and the price.........

[Hotrado]

Originally Posted by PureNoSideHate

So you're saying there is no other way to avoid that? I'm gonna have to Flatten an area down to get them in?

If you dont have torsion bars your fine, I have coil overs and my bro has torsion bars and we both have doug thorly headers I did not have to modify nothing my bro only had to flaten out a spot sothe header will not make contact with the torsion bar thats it

[Hotrado]

its a good 25-30rwhp increase with a tune

[PureNoSideHate]

Yeai was reading all that. Thanks for the info.

Originally Posted by Hotrado

its a good 25-30rwhp increase with a tune

[onelow1ton]

Originally Posted by PureNoSideHate

So you're saying there is no other way to avoid that? I'm gonna have to Flatten an area down to get them in?

Originally Posted by Hotrado

If you dont have torsion bars your fine, I have coil overs and my bro has torsion bars and we both have doug thorly headers I did not have to modify nothing my bro only had to flaten out a spot sothe header will not make contact with the torsion bar thats it

they will be just fine on your coil truck sorry for the confusion

[PureNoSideHate]

Well I ordered my headers today also bought myself a wide band sensor for tuning. Found the Headers on Amazon for about $50 cheaper. Which was awesome. The sensor was a lot but it's coming with a LCD screen that I can mount onto my dash. Can't wait to get everything in.

[budzilla]

Great! You won't regret it.