Chevrolet Colorado & GMC Canyon Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Interior
    Terribly dirty. Junk yard find console. But just in case anyone is able to, a Pontiac G6 console lid isn’t terrible looking. Easy to add. 😅 Hope this is not already posted. I did not see it anywhere.
  2. Console
    CONSOLE/FLOOR (D06) Drivelines: 2WD; 4WD; IPA: CONSOLE,FRONT COMPARTMENT FLOOR,ARM REST F/CMPT FLR A/RST CNSL(D06) TRM: INTERIOR TRIM CASHMERE (27I); INTERIOR TRIM COLOR,MEDIUM BEIGE/VERY DARK PEWTER INTERIOR TRIM COLOR(69I); INTERIOR TRIM COLOR,VERY DARK PEWTER INTERIOR TRIM COLOR(69I)...
  3. New Member Introductions
    I am new to the site, so this is my first post. I have a 2009 canyon ext cab, 60/40 bench with the stock cup holders. Im looking to replace the cup holders with a different console to add a tray of some sort. I was wondering if there was one that used the existing bracket that the cup holders...
  4. How-To: Lighting & Electrical
    Disclaimer The community here at 355nation.net urges you to please use caution and seek professional assistance when performing modifications to your vehicle. Before attempting any modification it is advised that you refer to your Colorado or Canyon service manual or contact a certified mechanic...
  5. Interior
    Im wanting to put in an overhead console. but i do not understand how it mounts..and if i have a manuel piece of crap mirror..and want to upgrade it to the electronic auto dimming one with the temperature readout...what would i wire the power in to. because the stock mirror had no electronics...
  6. How-To: Interior
    Disclaimer "Please use caution and seek professional assistance when necessary. 355nations.com, myself and all associated members are not responsible for any damages, injuries or other harm which may occur with this modification. This post does not reflect the views of 355nations.com and it's...
  7. How-To: Interior
    Alright. This is going to be a very basic how to. As in, it takes more time than anything. You are going to need very basic tools. Drill, wrenches, stubby phillips/torx screw drivers, etc. Here is also a list of parts you will need. H3 Lid (BLACK) # 15111830 H3 console # 15832110 H3 Shift...
1-7 of 7 Results
Top