Chevrolet Colorado & GMC Canyon Forum banner
drop
1-9 of 9 Results
  1. For Sale
    $40 with scratch. You pay shipping $50 without scratch. You pay shipping Scratch is about 1/2" long and located in the middle of the window. The one without scratch is still packaged and tapped up so don't ask me to open it. 2" drop consist of shocks and blocks. I personally haven't...
  2. Lowering
    So right now, I have a 3/4 drop on springs and blocks. I want to squeeze another inch drop, and my plan is to get some zq8 leafs and some adjustable drop shocks. To correct the lean, I'm going to get spacers, as I only have a half inch lean, and the drop shocks only adjust in whole inches if I...
  3. Lowering
    So its official, when I get my tax return I'm going to drop my truck. I am going to buy a 3/4 setup, springs and blocks most likely. Now my question, I have 235/75/R15 tires, anybody have rubbing issues or fender touching tire issues? I will take out my fender lining if needed for both front and...
  4. Wheels & Tires
    I have a 2005 z85 2wd with no fender flares and a 2/3 drop. Looking to put some kmc xd rockstar 20's on it. My wheel of choice is a 20x8.5 and my choices for offset are +10 or +35. I want the truck to look squatted with the tires sticking out just a tad. i will be running 275/45-20 tires. I was...
  5. Lowering
    hey so I looked all over this site and saw a lot of threads of how others lowered their z85s. It's really helpful but can be a handful. Can i have your guys inputs on the best & cheapest way to have a mild 2/3 drop on my z85? Just wanna know b/c i saw a lot of ways on here but not sure...
  6. Lowering
    I have an 08 crew cab with 22" wheels with a +25 offset. Right now i have 3 lca's up front, with 4" blocks out back. I wanna know if i can put lower leafs in the back along with 2 or 3 inch blocks? Then up front keep the lca's, but cut my factory springs 2"? I allready scrub on the driver side...
  7. How-To: Chassis & Suspension
    Disclaimer The community here at 355nation.net urges you to please use caution and seek professional assistance when performing modifications to your vehicle. Before attempting any modification it is advised that you refer to your Colorado or Canyon service manual or contact a certified mechanic...
  8. How-To: Chassis & Suspension
    Disclaimer The community here at 355nation.net urges you to please use caution and seek professional assistance when performing modifications to your vehicle. Before attempting any modification it is advised that you refer to your Colorado or Canyon service manual or contact a certified mechanic...
  9. Lowering
    Lowering Suspension Products and Part Numbers Help Guide BellTech Suspensions – Bell Tech Corp Ball Joints, Springs & Shocks. 2” Drop Ball Joints Part# 2103 Drop Front Shocks 0"/-1"/-2" Part# 25005 1” Regular Cab Front Springs Part# 4201 1” Crew Cab and Ext Cab Front Springs Part#...
1-9 of 9 Results
Top