Chevrolet Colorado & GMC Canyon Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. I4/I5 Engine & Drivetrain
    Recently I noticed that my truck was making a clunk noise under the truck when moving slowly on 4x4 (Hi or Low). Since this noise was only present on 4x4 I discard all components that are related to the front suspension (CV axles, brakes, etc) After inspecting the 4WD system I noticed that the...
  2. I4/I5 Engine & Drivetrain
    Was sitting in a drive thru the other day and threw my truck into park and it started making this strange noise. Its almost like a buzzing/grinding sound. I cant quite narrow it down, it seems like its coming from the transmission but it echos off everything underneath the truck so that's my...
  3. Chassis
    2011 GMC Canyon CC SLT w/ Z71. lately, a noticeable clunk/rattle present in drivers floorboard. I immediately inspected but could not find anything obvious. the sound is definitely a clunk, as in something loose is knocking into something fixed. what could it be? Thanks UPDATE: it appears...
  4. I4/I5 Engine & Drivetrain
    Hi all, I have a 2007 GMC Canyon with the I4 engine and automatic transmission. It has 225,000 miles and I am having the common problem of stalling while braking. I had this problem intermittently a long time ago and then my transmission went out. I had the transmission rebuilt which now shifts...
  5. I4/I5 Engine & Drivetrain
    I have a 2004 Canyon 4x4 automatic that is making a terrible grinding noise when coasting. I'm typically driving in 2wd with the gear selector in D4 at decent speed is when it does it. The noise goes away the instant you get on the gas. I have discovered that once it gets up to temperature, I...
  6. Engines/Performance/Tech Questions
    2008 4x4 crew 90k miles Lately, I have been hearing this loud clunk from the rear of the truck under hard acceleration and heavy braking (enough to dip or raise the nose more than normal). Clunks the loudest when braking hard and sudden. It won't clunk again until I accelerate hard. It goes...
  7. Lifting
    A couple weeks ago I installed a Readylift kit (69-3070, 2.25F/1.5R) on my 2009 Canyon SLE and now I'm getting groans out of the torsion bars. Is that normal? This is my first lift kit ever. After doing the work myself I took it to my mechanic to have the wheels aligned and also asked them to...
  8. I4/I5 Engine & Drivetrain
    Hey all, sad day I have to post this, I've had my 05 2.8L canyon for about a month and a half now, and the other day I noticed I was low on power, and when I turned down my radio I heard an unhealthy ticking/rattling noise (not rod knock) it tends to only happen when you start revving the engine...
  9. I4/I5 Engine & Drivetrain
    Hey y'all, I have an 06 colorado 3.5L 5 speed and at high rpm's (5000+) there is a very loud whistling sound that the engine produces, it almost sounds like a turbo whistle from inside the cab. It has done it since I bought it used at 95k miles and in its stock form, but it was barely audible...
  10. How-To: Interior
    Disclaimer The community here at 355nation.net urges you to please use caution and seek professional assistance when performing modifications to your vehicle. Before attempting any modification it is advised that you refer to your Colorado or Canyon service manual or contact a certified mechanic...
  11. Service Bulletins
    A/C - Blower Motor Chirping/Clicking On Low Speed Bulletin No.: 06-01-38-001A Date: January 19, 2007 TECHNICAL Subject: Excessive blower motor Clicking/chirping/whirring or Ticking Noises on Low Speed (Install Blower Motor Sound Insulator Cover) Models: 2005-2007 Chevrolet Colorado...
1-11 of 11 Results
Top