Chevrolet Colorado & GMC Canyon Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. I4/I5 Engine & Drivetrain
    Hello everyone, My vehicle is a 2004 GMC Canyon with the manual transmission and 3.5L L5. I have recently rebuilt the engine @ 253,XXX miles and she has been running for about 6 months and 2.5k miles. Throughout the break-in procedure it ran rather rough but has been getting progressively...
  2. I4/I5 Engine & Drivetrain
    Hello Everyone, I have an 08 Colly LT with the 3.7 and 4wd. I started off with a engine rebuild, but due to a balancing shaft bearing going rotten and no shop that was willing to fix or try to fix the surface in for the bearing in that area, I did a low...-ish (94k miles) engine replacement in...
  3. I4/I5 Engine & Drivetrain
    I have an 05 3.5 and I'm preparing to take the plunge and redo the timing chain (P0017 codes). As I'm looking for a source for a new VVT actuator, I'm noting the VVT part number changes over the years, along with significant changes in price. The part for the 04-05 engine is the most...
  4. I4/I5 Engine & Drivetrain
    New member here, just passing a thanks to all who contribute, and adding a comment on my P0017 code. I've had my 05 i5 Colorado 4x4 z71 AT 107k for a week now, and the P0017 came up strangely after an oil change by the dealer who sold me the car. I took the actuator solenoid out and it was a...
  5. I4/I5 Engine & Drivetrain
    I am one of the many people who have been afflicted with the curse of the p0017. I have already switched out my actuator solenoid twice, first with a dorman then when that didn't fix it I took it to my mechanic who replaced it with one he got from GM. The car is running fine and he says that...
  6. I4/I5 Engine & Drivetrain
    Hey all, thanks for any help you can give and for taking the time to read through this. I've been trying everything I can, and I'm at the point where I'm about ready to just pay to have the dealer look at it, but figured I would see if anyone here had an idea I didn't come across. My truck is a...
  7. I4/I5 Engine & Drivetrain
    So for about a year now I have been dealing with the dreaded cel p0017. After researching I replaced the solenoid (the part with the screens that always seem to go bad) the crankshaft position sensor and the camshaft position sensor. (I believe thats what they are called.) Couple months ago I...
  8. How-To: Performance & Maintenance
    Disclaimer The community here at 355nation.net urges you to please use caution and seek professional assistance when performing modifications to your vehicle. Before attempting any modification it is advised that you refer to your Colorado or Canyon service manual or contact a certified mechanic...
1-8 of 8 Results
Top