Chevrolet Colorado & GMC Canyon Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 37 Results
  1. Engine Swaps
    Ik it was probably on here already but cant really seem to find it… But i wanna swap out my 3.7 in my 09 colorado to a 5.3 also from a 09 colorado not going to be looking for performance parts yet just wanna do the swap first what are some of the things i would need to do it? And if y’all have...
  2. I4/I5 Engine & Drivetrain
    I had mentioned on here that I had recently purchased a 2008 Isuzu i-370 which is a canyon/colorado clone. The five cylinder was knocking but I got a good deal. Looked into swaps and finally decided to go with 2.9 L 4 cylinder. I have the 3.7 out and checking for fitment and so far the crank and...
  3. Engine Swaps
    Looking to see if anyone has used these adapters. L20 or Ly2 aren't listed so not sure. Also, is there info on dimensions on LS motor mount? I met a machinist in Canada that can make some for me. Just need dimensions. Thanks.
  4. Engine Swaps
    Tell me stuff, I will listen.I bought a 2005 Chevy Colorodo with 6.0 LSA swap, 4L65e built? 2500 stall 4x4 2dr.. nice truck. This what I know , used a Current Perrformance Wiring , was told it runs off of a 5.3 pcm. He gave me a tilt colum with cruise control? It’s got a alarm but no power...
  5. For Sale
    I have a set of front & rear leather seats from a 2008 H3. Front seats are power & heated, but front passenger is missing the controls/panel (photo attached). In decent shape overall - some scuffs/marks, but no tears. Before the photos, I just wiped them down with a rag/water, but some leather...
  6. How-To/Tutorials/Reviews/Service Bulletins
    Has anyone done a Frame Swap Crew to Ext ?? I have a 2004 Colo Z71 LS 4WD Ext cab. Frame is SHOT !! I found a good frame..SAME everything.. BUT it is Crew cab... I can cut, weld & fabricate... How MANY (cab / Bed mounts) will I have to 'reposition' ??... Based on specs... I THINK I'd just have...
  7. V6 Engine & Drivetrain (2015+)
    Hello everybody, I'm new in this site and I am interested in swap my automatic transmission to a manual transmission. I have some experience in For F250SD swaps, and found some Information about the 04-14 colorados swap but never saw something about the mos recent motdels as colorado...
  8. Engine Swaps
    So, this is a word of warning based on my experience, more of a rant really... In CA, you can only put in an engine originally sold for/in CA controlled vehicles. We all kind of know that. If you take say... an LH6. And move (or buy from dealer...) all of the CA cats, manifolds, ECU, etc. And...
  9. Engine Swaps
    I have a 07 4cylinder and I’m close to hitting 300K miles and more problems keep introducing their self. I’m wondering what’s the easiest and easiest on the pocket Engine swap I can do? What all is required for said swap as well
  10. Engine Swaps
    Hi i have a 2010 colorado 4cyl with the 2wd manual transmision i am swapping the 4cyl for a ly2 a 4.8 4th gen ls with no dod or vvt i am wondering if i need a custom engine harness from cp or would a oem chevy colorado v8 engine harnesss work? Also i would like to say that i plan on keeping it...
  11. Engine Swaps
    I'm trying to make my stock gauges work on my 06 Colorado 5 Speed, I have a 4.8 V8 running off of a Terminator X ECU. So Far, I've gotten the fuel level, coolant temp and speedometer to work, but the Tachometer is going to take more work to do. I kept the crank position sensor, cam position...
  12. How-To/Tutorials/Reviews/Service Bulletins
    So I have a 2006 Crew Cab Colorado 4x4 with the 3.5. I have been trying to go through here and do some reading on what axles would be the best for doing a solid axle swap. I know that quite a few of the axles have been eliminated due to the pumpkin having to be on the right side in order to keep...
  13. For Sale
    I have a complete still bolted together 5.3 4l60, t case out of a 2009 Colorado with harness and ecm/tcm. The engine will need rebuild, has piston slap noise, transmission and t case work great. Truck has 184k, worked fine just going big power. $4000 OBO located in Washington state. 509-520-6901
  14. Engines/Performance/Tech Questions
    I want to do an LED swap on my '08 cluster but also am in the process of getting new wheels and tires, so I don't know if the PSI will be the same as what is stock for the TPMS. Because of both of these and the fact that I have 2 TPMS related warnings that never go away, I am considering...
  15. Engine Swaps
    So i have a 07 Colorado with a 3rd gen 5.3 and 4l80e was wondering if anyone has used the adjustable trans mount to avoid modifying the trans crossmember? If anyone has any other tips on how I can get this to fit right would be greatly appreciated! The Adjustable mount I found on current...
  16. Engine Swaps
    Hello, I am in the middle of putting another factory engine in my Colorado because the current engine has a cyl 5 valve problem. I have everything disconnected and unbolted that I can think of except for the bell housing bolts. There are a few that are easily accessible, but I am wondering how...
  17. Engines/Performance/Tech Questions
    Dont make fun of me lol, but I've been super curious for a while if a 2j swap would work. I wanted to swap a 6.0 but everyone and there mom has an ls swap, I can't find one person that has put a 2j in a colorado, just a 2j s10. I'm almost positive it would fit, I have a 2.8 4 banger and I've...
  18. Engine Swaps
    I have an 08 2.9 5 speed in the truck right now and it started knocking so I’m gonna swap it myself but can’t find any 2.9 motors around, how big of an ordeal is it gonna be to change it to a 3.5 and what am I gonna need, I’m already looking for a motor with complete engine harness, computer and...
  19. Engine Swaps
    Got a rod knock in my truck. It’s a 3.5 5cyl. Running 15w-40 in her to quiet her down for now. Gonna drive her till she gets worse. Then I’m thinking aboot dropping a 4.8 in it. Was wondering what I would have to do to get one in there. Will the tranny work with the 4.8. What do I need to make...
  20. Engine Swaps
    Hello, long time troller, first time poster! :welcome2: I have a 2007 single cab work truck that is basically a sloppy mechanics Colorado clone. Since my motor came with the harness, ecm, and tcm i wired it up in standalone, I spliced into the factory wiring for the gas pedal but other than that...
1-20 of 37 Results
Top