Chevrolet Colorado & GMC Canyon Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 54 Results
  1. Want to Buy
    Looking for a set of wheels off a Colorado Xtreme to buy. I’m located in Atlanta Ga I am also looking into making an Xtreme clone if anyone has bodykit/gauges/etc I’m interested. Thanks!
  2. Wheels & Tires
    This is a dumb question I’m sure, but idk much about wheels/tires. I am planning to order stock 2014 Silverado/Tahoe wheels that are 18”, my truck currently has 15” wheels. I believe the tires are 225/70r/15 currently. I have a 2wd LS with stock suspension height, but may drop it 2” front and 3”...
  3. For Sale
    Unfortunately rust got the best of my frame and rotted it out where it won't pass inspection. Looking to sell or part out my truck. Inside and cosmetically it is super clean with some blemishes, mechanically everything runs perfect. Thanks Rochester NY area. I5 engine has 124,000 miles on...
  4. Aesthetics
    I am looking at buying some new wheels for my 2010 canyon crew cab. 4WD z85. I found the cragar soft 8 (16x8, +13). Lug centric. Would these work? I’ve seen photos of these wheels installed on these trucks all the time but I am not wanting to screw anything up. Still sorta new to working on...
  5. Wheels & Tires
    Hey everyone I’m looking for the infamous extreme wheels, if anyone has a good lead on them, I’d love to trade my Level 8 MK6’s 18x9s+12 offset and a full set of spare tires to go with them!
  6. Want to Buy
    Just my luck... after some restoration and paint on the wheels last weekend I took her out for a spin. Pulled back into the drive, hopped out, and WTF!? Driver rear centercap is gone... made its exit so quietly I didn't even notice till I hopped out the truck at home.... So on the off chance Is...
  7. For Sale
    Looking to sell the wheels off my Colorado. They are MB Legacy wheels in 20x9 +18, and I’d like to get $750. They were installed on a 05 Colorado but should fit anything with a 6x139.7 lug pattern. They are in excellent condition with the exception of one small spot on one of the wheels. I was...
  8. Exterior
    I was finally able to paint the chrome on my truck, something I’ve wanted to do for awhile. Also painted the recovery hooks red for a little more pop. Lmk what you guys think!
  9. Wheels & Tires
    Ok well I’m a new guy to the Colorado scene with my recently purchased 2005 Colorado Z71 4x4! With doing some browsing in here I decided I’m gonna go with a Suspension Maxx Key and shackle lift with their shocks they make, and will be doing some 275/70r17s. So first off I get kinda lost in...
  10. Wheels & Tires
    Hello I'm new to all of this and I dont really understand offsets. My truck is a stock LT crew cab. I was wondering if I'd be able to fit 15x10 wheels without any issues. I think another truck I almost bought had 15x10 deagan 38 pro 4s but I'm not sure if they were actually 15x10s.
  11. Brakes
    Hello and thanks in advance for any responses. I have an 05 colorado with drums on the back I saw the post about getting the GM parts to put disc brakes on the back. My question is would it be easier and cheaper to go to a U Pull It and just get an entire rear end with disc brakes on it all...
  12. Wheels & Tires
    I recently got new wheels for my 06 canyon 2wd and I’ve had a few studs start to break on both sides, I’ve replaced both hubs so don’t understand why this would be happening. I’ve been looking for issues that could cause this and noticed that the front wheels have indentations from the bolts...
  13. Wheels & Tires
    I have a 2006 Chevy Colorado base model with 245/70/17 tires on it but I want to change the hubcaps for rims. The rims I’m looking at are 17x8 and 6x139.7 but my question is will 0 offset, 4.5 backspace stick out past the fender? Ideally I would like it to be flush and I can’t seem to find a...
  14. Wheels & Tires
    I've purchased some used stock wheels (two are from a local junkyard off a 2008 and the other two I got on eBay from a junkyard in Minnesota and are off a 2006) to put on my 2007 Colorado Crew Cab. They are the same wheels that the truck already has except they are the factory silver painted...
  15. Exterior
    Hey all, first post! I want to run 265/75R16 tires on my 2011 Colorado 4WD. I have a 2.5" level kit on it. I don't think running these tires should be any problem, but I am having a little trouble determining what wheels I need to get in order to avoid rubbing. I believe the stock offset on the...
  16. Wheels & Tires
    Sorry to bring up another as I've been reading through all the posts on wheel size and suspension setup. I think I have it down, but to confirm: I can fit 285/65s on an 8 inch wide rim if I keep the backspacing at 4.5" or less. I have a slight torsion bar crank of 1" just to make it sit a...
  17. Wheels & Tires
    Hey guys. I have a 2009 GMC Canyon z71 crew cab. I have stock 17 inch rims on 265/70/17 BFG M/T. I have found rims I really want to buy, they are 20'' replica wheels.I have already put in new torsion bars and will crank them if i need too. I'm wondering if I could fit 275/55/20 on stock...
  18. Weight/Balance
    WHEELS & WHEEL COVERS/ALUMINUM (CHEVROLET X88) Drivelines: 2WD; CHP: CHASSIS PACKAGE,INCREASED CAPACITY CHAS PKG(Z85) ENG: ENGINE GAS, 8 CYL, 5.3L, SFI, ALUM, HO, GM 5.3-L(LH8) MAR: CONVERSION CHEVROLET CHEVROLET(X88) WHL: WHEEL 16 X 6 STEEL, 23MM OFFSET STEEL WHL(PP4); WHEEL 16 X 6 STEEL, 41MM...
  19. Great Deals
    Four Chevrolet factory 16"x6.5" wheels, tires, lug nuts, and center caps, and a spare Four Chevrolet factory 16" wheels and tires and a spare wheel and tire Plus shipping which would be $250.
1-20 of 54 Results
Top