Chevrolet Colorado & GMC Canyon Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
210 Posts
Discussion Starter #1
Been doing some research for quite a while, but I've never been fully clear on the best way to get just a 1/1 drop on my ZQ8. I just want the stance a little sportier, and I don't care about leveling the back (I kind of like the back end a little up). I also want to keep the ride height semi practical for getting over speedbumps and stuff. Would Z85 3" springs/blocks work? Do any of you know what would be the best way?

BTW - searched other forums quite extensively, and still couldn't find a good post on this.
 

·
Quadruple O.G.
Joined
·
5,624 Posts
Belltech 2" 4203 springs in the front and add a 1inch block in the back. Since your removing the stock 1" springs in the front and replacing them with a 2 inch spring its only going to lower you 1 inch over stock.

Thanks Dave
 

·
o.g.
Joined
·
3,412 Posts
No I would go with 2" springs for a z85 and 1" blocks. Thats if you only want 1 inch in the front.

edit I guess dave posted first
 

·
Registered
Joined
·
210 Posts
Discussion Starter #4
Ahh, I see. Thanks yall. Never have gotten into dropping any of my trucks, but I think this one would look just right 1" lower to me.
 
1 - 5 of 5 Posts
Top