[ryley911]

So its official, when I get my tax return I'm going to drop my truck. I am going to buy a 3/4 setup, springs and blocks most likely. Now my question, I have 235/75/R15 tires, anybody have rubbing issues or fender touching tire issues? I will take out my fender lining if needed for both front and rear. Any pics would help a alot, and I have yet to see my tire specs with a 3/4 on the forums with closeup pics.
Thanks in advance!:salute:

 

[thundering02]

we have an entire thread devoted to this called show your wheels. check it out.

 

[Uncanny355]

I would go djm arms and blocks same drop just rides better so I hear. I have a djm 3/4 kit, arms and blocks for sale. I've decided to go a different route

 

[ryley911]

I would go djm arms and blocks same drop just rides better so I hear. I have a djm 3/4 kit, arms and blocks for sale. I've decided to go a different route

How much are you asking?

 

[truefire04]

when i had my truck, i had 2/3 on top of the zq8 suspension witch is a 3/4 drop. i had the bell tech lowering shocks on it and i also ran some 18" it rubbed on the driver side, how ever i added a few spacers onto the shocks to level it better. i had removed the 18s and put the stock 17s on at the time.

 

[Jesse]

Your drop would be less than 3/4 on a ZQ8 suspension.

Not sure on the tire size but if that's a stock size your running you'll have a little bit of rubbing. I did a 4/4 drop on my old truck with stock 15's.

 

[ivan29]

Didn't you create a thread for this Jessi? :gd: just direct them to it.

http://www.355nation.net/forum/lowering/60548-random-lowering-chat-s.html

 

[Jesse]

I aint going to that shit hole town? :shrug: