Chevrolet Colorado & GMC Canyon Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
Hey guys so i was under my truck to do a 1/2 diff drop. after struggling with the rear bolts for a good half hour i got my drop done but happen to notice 2 holes underneath the bell housing case? 1 rectangular and 1 circle. Is it normal to have both holes exposing the gears? i couldn't find any information about plugs for our trucks.
 

·
Registered
Joined
·
2,961 Posts
Subscribed..
 

·
Registered
Joined
·
4,917 Posts
It's only exposing your flexplate. But there's suppose to be 2 plugs. A metal one and a rubber one. As of where to find them I have no clue. I need the rubber one myself.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #5
Thanks man. looks like i have part #97 in tact. part #98 is the huge round one im missing. What about the rectangular hole? is that meant to be exposed? i went back under the truck to take a photo.

2008 Chevy Colorado
 

Attachments

·
Super Moderator
Joined
·
1,882 Posts
That elongated hole looks like it is split between the rear of the engine and the transmission bell housing. My gut says it doesn't have a cover, but I just ate some green hatch chili sausage with some green hatch macaroni and cheese. My gut is prone to being wrong on what it knows and what it can take. Lol
 

·
Super Moderator
Joined
·
13,732 Posts


ENGINE TO TRANSMISSION MOUNTING



Item Number: 005
Part Number: 24205900
Description: Transmission Case. COVER. PLUG.
COVER,T/CV HSG ACC HOLE(62MM W/3 TANGS)(LARGE CVR)(ACDelco #24205900). Required: 01
For: N1 4-SPD A/TRANS(M30) (2006-2010) (2006 - 2010).
For: ST1 4-SPD A/TRANS(M30) (2004-2011) (2004 - 2011).
Cost: $6.76

Item Number: 007
Part Number: 12569419
Description: PLUG. Engine Oil Pan
PLUG,OIL PAN HOLE. Required: 01
For: N1 (2006-2007) (2006 - 2007).
For: N1 3.7E(LLR) (2008-2010) (2008 - 2010).
For: ST1 (2004-2007) (2004 - 2007).
For: ST1 2.9-9(LLV) (2008-2011) (2008 - 2011).
For: ST1 3.7E(LLR) (2008-2011) (2008 - 2011).
Cost: $5.96
 

·
Registered
Joined
·
25 Posts
Discussion Starter #8 (Edited)


ENGINE TO TRANSMISSION MOUNTING



Item Number: 005
Part Number: 24205900
Description: Transmission Case. COVER. PLUG.
COVER,T/CV HSG ACC HOLE(62MM W/3 TANGS)(LARGE CVR)(ACDelco #24205900). Required: 01
For: N1 4-SPD A/TRANS(M30) (2006-2010) (2006 - 2010).
For: ST1 4-SPD A/TRANS(M30) (2004-2011) (2004 - 2011).
Cost: $6.76

Item Number: 007
Part Number: 12569419
Description: PLUG. Engine Oil Pan
PLUG,OIL PAN HOLE. Required: 01
For: N1 (2006-2007) (2006 - 2007).
For: N1 3.7E(LLR) (2008-2010) (2008 - 2010).
For: ST1 (2004-2007) (2004 - 2007).
For: ST1 2.9-9(LLV) (2008-2011) (2008 - 2011).
For: ST1 3.7E(LLR) (2008-2011) (2008 - 2011).
Cost: $5.96

way to come through! thanks man im placing the order right now. i took the truck on sand and ran over a puddle that was probably 2 - 3 ft high recently. i hope there isnt any damage done with those holes exposed like that.
 
1 - 8 of 8 Posts
Top