[B-_-RAD]

Has anyone run that setup? I ordered the djm 3/4 but when I measured my truck there's only 1/4 rake front to rear. I was thinking of adding the belltech shocks to freshen up the front end more and go up to 4/4 drop. Just curious if it has been done since I've heard of issues using the struts and arms together.

 

[t-bone]

I have djm arms and bt front struts and the only issue I had was putting the drivers side back on it was hitting the frame so I had to use a bfh

 

[B-_-RAD]

Cool, sounds good. I wonder if I'll need a crossmember with a 4/4 drop?

 

[t-bone]

I have 1 and I bottom out on a lot and I have a 4/6 drop it would be a good idea

 

[lil_nene]

I would recommend a x member just to save headaches.

 

[BigR]

I have the DJM arms with BellTech 21003 shocks. with the 3/4 drop you should get a trans crossmember as others have said. You may need a c notch also.