[babalou731]

Looking for part numbers of the Male and Female connectors (can be with or without cableing) used on the 2017 Colorado's tail light.
Doing some aftermarket add on's and I rather make a Y connector than have to solder or cut items permanently together

Thanks

 

[OldGuy]

Not sure what you're looking for. If you're looking to add trailer lights, there are all sorts of companies out there online that offer a harness that plugs into the existing harness to provide that for you. For anything else, I'd check out rockauto.com and see what they have.
A little more explanation of what you're trying to do would be very helpful.

 

[Blue15ColoradoLT]

Hmmm. I just happened to have found a pair on ebay for I believe what exactly you are looking for.

I plan to make an LED tail light harness to prevent hyperflash on my 2015.

If whats in my picture is what you are looking for, then here is your list:

Molex 33482-0601 MX150 6-Pin Connector, Male
Molex 33012-3002 Loose MX150 Socket Terminal
Molex 33472-0601 MX150 6-Pin Connector, Female
Molex 33000-1002 Loose MX150 Pin Terminal

 

[babalou731]

Thanks OldGuy... Looking to add step lights and did not want to solder into existing tail light harness, just in case down eh road I wanted to replace the tail lights

 

[babalou731]

Thanks Blue15, YES that is what I am looking for.. Funny the Molex part number you have in all distributors is discontinued... mmmm.. where on Ebay did you find

 

[Blue15ColoradoLT]

Thanks Blue15, YES that is what I am looking for.. Funny the Molex part number you have in all distributors is discontinued... mmmm.. where on Ebay did you find

Molex MX150 Female Connector Black Molex 33472-0601

Molex MX150 Male Connector Black Molex 33482-0601

Molex MX150 Male Terminal 20-16 Ga.Molex 33000-1002

Molex MX150 Female Terminal 20-18 Ga.Molex 33012-3002