Re: Fitzter's 355 Project.
Love it.
How much to get those rear wheels stretched out?
Love it.
How much to get those rear wheels stretched out?
Fitzter's 355 Turbo Project.
Hey everyone, been on here for awhile now and thought it was time to start a build thread.
Here is some of the information on the truck and my future plans.
2004 Chevy Colorado ZQ8, Regular Cab
3.5L I5, 5 Speed and 3.42 gears.
Finished Mods
Performance
Supermod ported and polished throttle body.
Supermod electric fan.
Borg Warner/AGP S256sx turbo.
Tial 50mm BOV.
Tial 38mm wastegate.
Siemens #80 injectors.
Walbro 450 fuel pump.
K&N pod filter.
Front mount intercooler.
Straight pipe exhaust.
Innovate Motorsports SCG-1 boost controller.
Snow Performance Stage 1 Water/Meth Injection Kit.
South Bend stage +2 clutch.
N2MB wot box.
Tuned by Limeswap with HPTuners.
Suspension
Belltech coilovers.
Belltech ball joints.
Belltech rear shocks.
Belltech 2'' blocks.
Belltech lowering leafs.
Belltech front and rear sway bars.
Front 1.25'' wheel spacers.
Calvert low profile traction bars.
Front Nitto NT555 255/45R18 tires.
Rear Nitto NT05R 305/45R18 tires.
SSBC front and back brake calipers.
Hawk Performance Street 5.0 brake pads.
Stainless steel brake lines.
Rear extreme rims widened 1.5''
Extreme rims powder coated black.
Rear 4x4 axle with 3.42's and g80.
Exterior
Line X liner.
Stubby antenna.
Debadged.
High and low beam mod.
Z71 Flares.
Cowl hood.
Redline hood struts.
Blacked out bowtie.
SS roll pan.
SS mirrors.
Tinted windows.
Supermods ASSLD5 kit.
LED taillights.
LED third brake light.
Krfab low profile transmission crosmember.
MBRP exhaust tip.
Interior
SSK short shifter.
Speed dawg shift knob.
Kenwood double din deck with navigation.
Kenwood 6.75'' component door speakers.
Kenwood 6''x9'' speakers.
Here is some of the information on the truck and my future plans.
2004 Chevy Colorado ZQ8, Regular Cab
3.5L I5, 5 Speed and 3.42 gears.
Finished Mods
Performance
Supermod ported and polished throttle body.
Supermod electric fan.
Borg Warner/AGP S256sx turbo.
Tial 50mm BOV.
Tial 38mm wastegate.
Siemens #80 injectors.
Walbro 450 fuel pump.
K&N pod filter.
Front mount intercooler.
Straight pipe exhaust.
Innovate Motorsports SCG-1 boost controller.
Snow Performance Stage 1 Water/Meth Injection Kit.
South Bend stage +2 clutch.
N2MB wot box.
Tuned by Limeswap with HPTuners.
Suspension
Belltech coilovers.
Belltech ball joints.
Belltech rear shocks.
Belltech 2'' blocks.
Belltech lowering leafs.
Belltech front and rear sway bars.
Front 1.25'' wheel spacers.
Calvert low profile traction bars.
Front Nitto NT555 255/45R18 tires.
Rear Nitto NT05R 305/45R18 tires.
SSBC front and back brake calipers.
Hawk Performance Street 5.0 brake pads.
Stainless steel brake lines.
Rear extreme rims widened 1.5''
Extreme rims powder coated black.
Rear 4x4 axle with 3.42's and g80.
Exterior
Line X liner.
Stubby antenna.
Debadged.
High and low beam mod.
Z71 Flares.
Cowl hood.
Redline hood struts.
Blacked out bowtie.
SS roll pan.
SS mirrors.
Tinted windows.
Supermods ASSLD5 kit.
LED taillights.
LED third brake light.
Krfab low profile transmission crosmember.
MBRP exhaust tip.
Interior
SSK short shifter.
Speed dawg shift knob.
Kenwood double din deck with navigation.
Kenwood 6.75'' component door speakers.
Kenwood 6''x9'' speakers.
1 - 20 of 425 Posts
Re: Fitzter's 355 Project.
I'm seriously looking at going to some Z71 flares too
Not bad.
I'm seriously looking at going to some Z71 flares too
Re: Fitzter's 355 Project.
I love this build
I love this build
Re: Fitzter's 355 Project.
Only thing I see on their page is the S/C kit? Did I miss somethingI pulled the trigger on the OTTP turbo kit. Should be picking it up next week sometime.
Re: Fitzter's 355 Project.
Those are good numbersDry
1# 205
2# 200
3# 195
4# 200
5# 205
Wet
1# 205
2# 205
3# 200
4# 203
5# 205
Re: Fitzter's 355 Project.
I would personally run a B&M cooler out in front of the radiator though.....to get the coolest air.
I don't see why you couldn't.So I was installing the intercooler today and when I was drilling one of the holes I managed to tap the rad..... so with that I have a question. Can you use the rad with the automatic cooling built in and use it for an oil cooler? Looks like I will have to replace it regardless lol. Dammit!
I would personally run a B&M cooler out in front of the radiator though.....to get the coolest air.
Re: Fitzter's 355 Project.
You lucky SOB.......if I didn't own a house and have a family that sucks me dry :hide:What is this????
Re: Fitzter's 355 Project.
^^ good question
^^ good question
Re: Fitzter's 355 Project.
Fail on the update.................no picturez :hulk:
Fail on the update.................no picturez :hulk:
Re: Fitzter's 355 Project.
Mo parts???????????
Whats up now :run:
Mo parts???????????
Whats up now :run:
Re: Fitzter's 355 Project.
Oh shit
Oh shit
Re: Fitzter's 355 Project.
11.987
11.987
Re: Fitzter's 355 Project.
Straight pipe....... No cats or muffler?
Straight pipe....... No cats or muffler?
Re: Fitzter's 355 Project.
Those numbers are damn impressive.
So know you have a kit that's proven......... make some for retail
Those numbers are damn impressive.
So know you have a kit that's proven......... make some for retail
Well the Data Logger helped you yield a .4th sec gain....... money well spent there
Which clutch are you looking to get?
My SPEC Stage 1 clutch should arrive tomorrow! They have all the way up to stage 4 for us 355 guys..... some decent prices on eBay for them too
My SPEC Stage 1 clutch should arrive tomorrow! They have all the way up to stage 4 for us 355 guys..... some decent prices on eBay for them too
Any updates on the clutch talk men???
What I would really like is a fuckin light weight flywheel.
What I would really like is a fuckin light weight flywheel.
My thought is less rotating mass.... I've had them before and loved the results(s)
I don't have the boost problem :kiki:
You boosted your truck and you thought dropping the axle was going to be hard :run:
Easy work brother, you got it
Easy work brother, you got it
1 - 20 of 425 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Chevrolet Colorado & GMC Canyon Forum
A forum community dedicated to Chevy Colorado and GMC Canyon owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
Explore Our Forums
