Chevrolet Colorado & GMC Canyon Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
531 Posts
Discussion Starter #1
Looking for either a bolt in Colorado specific notch or a universal bolt in notch, either one will be welded in. What do you mofos have? :salute:
 

·
Registered
Joined
·
1,669 Posts
In all honesty, buy some 2x3 steel tube and make your own. It’ll fit better being built to your truck. Any type of universal is just that, universal and won’t ever fit your frame/truck just right. It costs about 75 bucks to buy a universal and then another 20 bucks to have it shipped to you. When you can build a custom fit to your truck notch for fewer than 20 bucks.
That’s my 2 cents worth..
 

·
Premium Member
Joined
·
798 Posts
I used the bellTech 6603 notch kit. I bolted and welded it in. Here is a couple pics of the install.
[/URL][/IMG]
[/URL][/IMG]
 

·
Premium Member
Joined
·
19,139 Posts
Another option would be to get a 6" or 8" steel tube section (can usually find some scrap laying around), cut it in half for a 3" or 4" notch, and use that along with some flat plates for the sides...
 

·
Registered
Joined
·
2,757 Posts
Only cost was the pipe, and a 4.5" hole saw





 

·
US Army 19yrs and ......
Joined
·
45,284 Posts

Part #: CSE-CV04XX
Description: C-Sections, 4 pieces Frame Notches Chevy Colorado (Pair)
Cost: $139





Yup, I went the same route as Rich.....being the strongest and most cost effective notch on the market right now.

My pics for your viewing pleasure






I got it for $138 w/ free shipping. And my homie @onelow1ton helped me get it installed
 
1 - 7 of 7 Posts
Top