[micromachine940]

Has anyone installed the Gen II bumper cover, if so was it hard to do, and how do you do so?

 

[Dctrpayne]

Has anyone installed the Gen II bumper cover, if so was it hard to do, and how do you do so?

takes 2 mins if that........only problem is the fog lights dont line up if you have them

 

[ivan29]

i b t l

 

[rshadd]

It's super easy.
[pdf]http://www.streetsceneeq.com/instructions/pdf/950-70218.pdf[/pdf]

 

[bk2life]

yup, clean, wash, air dry, apply double sided tape, push onto your metal bumper (hence why it's called a bumper cover) and that's it.

some develop a squeak on the sides of the bumper flapping/rubbing against the metal bumper or a portion of the fender, apply more double sided tape, or drill a small hole and screw or pop-rivet it in place.

super easy.

install fit before taping, adjust if needed, mount, and then remove bumper for paint.

 

[CUZICAN]

This link will show you where to look for contact and how to trim the cover, if it touches in the place in the pics, it doesn't matter how you attach it, it will squeak.

http://www.355nation.net/forum/exterior/27856-ss-front-bumper-anybody.html#post749267

 

[micromachine940]

Thanks for the info, now just have to get back home to test fit and send to paint