Thats a first or hearing that happen.If you can get a welder on it that would be the best bet.
Help needed with diff spacers?
Hey guys! I'm working on getting a set of spacers, and figured I would drop the bolts out of the front diff mounts, and wait for the spacers, and the new half shaft to come... or so I thought.
The Problem: I started loosening the bolts, and one appears to have a nut inside the boxed frame, with no apparent way in with a wrench. Is this the same on everyone elses, or did the welds brake off a nut welded to the frame?
HELP!!
Thanks.
***anyone response with a tech diagram would be most appreciated.***
The Problem: I started loosening the bolts, and one appears to have a nut inside the boxed frame, with no apparent way in with a wrench. Is this the same on everyone elses, or did the welds brake off a nut welded to the frame?
HELP!!
Thanks.
***anyone response with a tech diagram would be most appreciated.***
1 - 2 of 25 Posts
Can you get nuts into the frame on those spots?If so just grab a cut off wheel and chop the head off and push it thru the frame.Then slide the new nut in there.
1 - 2 of 25 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Chevrolet Colorado & GMC Canyon Forum
A forum community dedicated to Chevy Colorado and GMC Canyon owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
Explore Our Forums
