Chevrolet Colorado & GMC Canyon Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
235 Posts
Discussion Starter · #5 ·
No I bolted it all right. I just had to loosen the sway bar and then used the stock end links. It was about a 1 inch distance between the LCA and where the swaybar was originally. So I adjusted the sway bar so that I could use the stock end links
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top