Chevrolet Colorado & GMC Canyon Forum banner

Removeing clear and paint

1344 Views 13 Replies 9 Participants Last post by  1BADI5
I have a small spot on my zq8 wheels where the clear and paint has come off.I used alittle polish and it really has a shine to it.My question is,how hard would it be to remove the clear and paint.
1 - 5 of 14 Posts
I am not wanting to paint,just wondering how to remove the clear coat and paint.Planning on polishing the wheels to a shiny finish.
Yep,down to bare metal then polish them.
I was thinking these wheels are aluminum ,or are they made out of something else.
I have done some wheels before that had clear coat on them but no paint.I spent many hrs polishing the wheels.They looked like chrome when done right.A drill with buffer pad and a dremel for the tight areas
1 - 5 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.