Chevrolet Colorado & GMC Canyon Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
i have some 2003 z71 silverado rims that i got cheap and i painted them and changed the center caps and everything. i have wheel spacers but of course the bolts coming out are still m12's while the silverados are m14's. have anyone dealt with this before since i want to keep my center caps. or could i get colorado nuts and new caps and make them work? any ideas or suggestions would be great thanks guys!

View attachment 13114
 

Attachments

·
Registered
Joined
·
2,685 Posts
And the obvious question. Where'd you get'em?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #6
I took a chance today when going to my local pull a part and grabbed 24 of S10 and S10 Blazer lugs and the caps since they are the M12x1.50 pattern, the work great with the silverado wheels.they cap is a little smaller inside the over all hole but it is just wide enough to grab onto and hold the cap down to the lug.a cheap fix and worth it for 10$ for all the caps and lugs
i noticed all the camaro,s10,s10 blazers,bravadas,late model impalas and all of the pontiac cars and cars with Hubcaps have the same slightly longer nut and the right nut caps
 

·
Registered
Joined
·
446 Posts
I've been trying to figure this out as well.. I can't find anything..
 
1 - 12 of 12 Posts
Top