Does anyone know if theres a CST 5" lift for a 2010 colorado 4x4, on their website it says 2004-2008 for the kit. Or has anyone used this kit on a 08 or newer?? Thx.
Blaze
you can probably make it work. i know that atleast the wheel speed sensors are different. not sure what else
The spindles for the cst 2wd kit can be MADE to work on the 4wd. there is a thread on here proving it, just do a quick search bro!
i would call and ask them, there are only a handfull of people with the 4x4 cst kit on here and none are newer than like an 08
lol ya, im one of the few that have done it and i wouldn't recommend it, im replacing it with a 4" kit soon
welcome to the nation fellow PG owner! the PG 355's are representing, that makes 6 of us! we are gonna do a PG area meet/wheel I think 
Have I seen your truck before do you have any pics?
you can always do a 4" lift kit and add shackles and a TB crank for 2-3 more, 3" body lift = 9 total
Have I seen your truck before do you have any pics?you can always do a 4" lift kit and add shackles and a TB crank for 2-3 more, 3" body lift = 9 total
Ya i have the Maxx cam tortion keys in front gave me about 2 1/2 inches and 2inch shackles in the back i would like to clear 33'' tires with all suspension cst or not i want a 4-6 inch lift. Is the rancho 4" kit any good anyway thx for the replies. Lovin dirty PG for 27 yrs lol...a meet woud be cool.
Zeuce works at auto magic tire.I'm sure he could hook you up with the rancho kit.Its a good kit I saw it on ryzer's truck at the jasper meets.Yours looks good too.I might have seen it before.How long have you had your truck?
I have acsess to a ranch kit (no shocks) for under 2 grand if its still at my warehouse. You need to have 17" wheels minimum to install a 4" lift kit FYI. With the setup you have now, if you run a wheel with 4.5-5 inch offset you should be able to clear 33's I cleared 33's on toyota steelies before I had my body lift and all I had was a 3" TB crank.
Blaze: why not just body lift it and throw some nerf bars on it?Looks pretty clean if you do get gap guards.
From what I have been told after doing some research about demodding my truck and trading it in for an 09+ V8, the CST kit won't work with the newer ones do to something being changed with the spindle itself. Not positive though since I never found out EXACTLY what was different though.
Blaze: You looking for some Nerf Bars for your truck by chance?I am gonna pull mine off pretty quick.I also have a set of CCFL headlights if your interested.
Blaze, here is the answer to your question...
http://www.355nation.net/forum/chassis/43907-differences-04-08-09-spindles.html
http://www.355nation.net/forum/chassis/43907-differences-04-08-09-spindles.html
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
