Chevrolet Colorado & GMC Canyon Forum banner

USA Super Meet and EMAXXER Tuning services!

12K views 83 replies 23 participants last post by  emaxxer  
#1 · (Edited)
Disclaimer
The 355nation.net staff has granted the following member limited site vendorship.
The member has agreed to the follow site guide lines, since no contributions are given to the site, they will be considered a second rate vendor.
If a site sponsor is selling the same or similar product they will no longer be allowed to sell their items. These terms are unconditional and at the discretion of 355nation.net staff.
For further information and terms please see "Limited vendorship application and agreement".
The staff and the associated members are in no way responsible for any sale, product damage or other shipping problems.
The posts and content presented on this site reflect in no way the views of 355nation.net or it’s ownership.


I will be at the USASM available for tuning so I'd like to make a list of members that would be getting a tune. You can leave a list of the mods that are done to the truck so I can attack the key areas in the tune.

$200 for a basic tune (spark, idle, power, DTC's, shift points, gas mileage adjustments for part throttle torque, speed limiter, torque management, etc etc. basically everything besides adjusting fueling unless you no longer have catalytic converters)

If you have any questions feel free to ask!

Thanks :salute:,
Mike


Tune list:
1: stoutbait @ 7pm friday night
2: 07_ZQ8
3: Black_Rado
4: dbizzle
5: moose8820
6: keno
7: ce4

pm me for my phone number and text me if you'll be there on friday and/or sunday if you are not on the list but would like to be worked in.
 
#13 ·
Come on I know more than 5 people need/want a tune!

When I tuned mine it was the single most impressive mod I did. Its not just wide open throttle where the gains are. Daily drivability goes through the roof!

Bump for a very smart guy
Thank you Cory! I really apreciate it!
 
#14 ·
Best of luck to you, emaxxer.
Thank you!

I don't mean to step on people's toes but I'm just offering something that I know some people want that in turn makes me happy because it makes them happy! I'm addicted to performance whether it be better gas mileage or maximum horsepower. Whatever the customer wants out of their tune, I will give them. I can't make mermaids come out of the exhaust though. :shrug:
 
#15 ·
If you have all boltons or just some or none just stock. Mike will tune it to max performance for you keeping it a safe tune.He worked on my tune for a few hours to get it right.Well worth every penny and more.

Example. I can drive mine with no care or intent of saftey [like I just did a bankjob just hammerimg on it] and get better than stock tune gas milage if I drove it carefully. All in what you want.
 
#16 ·
Dude you promised me their'd be mermaids :( haha. Mikes tune is a tune while you drive. We flashed my CPU in a gas station parking lot while we were out. The whole time me was watching what my truck was doing. Some people are just ignorant I guess.
 
#18 ·
I have been thinking about making a trip to STL this summer sometime just to get tuned by emaxxer(that would be 5-6hrs of driving from where I am) and then paying the 200$ when I got there just because I have heard good things about what he does. I am THRILLED at the fact that he is coming over half the distance to me for the USASM and for 2hrs of driving and $200 out of my pocket, I think it will be more than worth it for a guy that lives in KS and has to deal with the fact that there isnt much or any thing like a truck enthusiast scene around here. I am excited to meet some real 355 people for once, and to get a tune while it all goes down, EVEN BETTER! thank you Emaxxer
 
#19 ·
AWESOME!!! Thank you! It's an 8 hr round trip for me and I can't wait to meet everybody and the monstrocities they've created with their trucks! I plan on driving down to Texas shortly after if they can get a meet setup so I can see them again! I had a blast at the last super meet I went to and I plan on going to many more. :thumbup:
 
#20 ·
I can't wait for USASM, I want to meet other 355 enthusiasts. Hopefully get to know some of the people from the Central Northeast region and get some meets of our own started. But Mike a tune from you is a huge reason I am driving 9 hours one way with my cash in hand. I know I don't have the farthest drive but it is still a hike. After talking to Mike and from the things I have heard my Rado is in good hands and I will get a tune specific to ME and MY TRUCK! $200 seems like a reasonable price. You have to save less than $1.66 a day if you start today.

Thanks Mike for the service you are providing!
 
#26 ·
Alright, I just read through all of this!

Keep this on topic guys, if you have beef with someone take it to PM, this is the first and final warning.

Just like your freedom of speech, you have the freedom to use what ever vendor you want, so I see this as a silly bunch of bickering for nothing.......now move on!
 
#41 ·
Congratulations Mike on your Lim Vendor status.

This thread will be used to offer tunes at MESM.

Thread has been cleaned up and moved to the correct section and I believe I was able to remove all the unrelated posts. If I deleted one too many, let me know and I can pull it back.


As Jeremy stated, keep it on topic and keep it clean.
 
#27 ·
Hey Mike when we get back to Dallas we can have a meet at the club house and you can tweek my existing tune. Stocker did a great job but I was not as experienced to ask for all I needed. You can do it back here so you can have a little time that weekend to enjoy yourself. $200 is probably one of the cheapest of all the mod we do as enthusiests.