[La Colorado]

I was poking around on JEGS and i enter my year/make/model for my Rado and just clicking around it says this will fit our rear ends......but ours are 8" rears right?? the AAM 800 IS a 8"??


Detroit Locker 912A317 - Detroit Truetrac Differentials - JEGS

 

[WTRacing]

Oh snap, someone needs to confirm this LOL

 

[La Colorado]

Oh snap, someone needs to confirm this LOL

if they do i found my new mod!!! haha

 

[PuckkcuP]

hmmmmmm. i might say this i san excellent find. i don't have a need for one just yet. but i'm definitely bookmarking this

 

[La Colorado]

hmmmmmm. i might say this i san excellent find. i don't have a need for one just yet. but i'm definitely bookmarking this

i think this is a hick up on JEGS part cause our rears are 8" rears......and the spline count is what on ours??

 

[PuckkcuP]

i thought it was 28 but it might be 27. idk there's a post on it from yesterday i can check

 

[PuckkcuP]

looks like we have a 27 spline

 

[La Colorado]

i thought it was 28 but it might be 27. idk there's a post on it from yesterday i can check

please do...cause the Detroit Locker says it works with 28 spline axles!!!!!

 

[PuckkcuP]

yep definitely a 27 spline for oue trucks. and you can double check me inthe rear end topic right above this one in engine and drivetrain

 

[La Colorado]

yep definitely a 27 spline for oue trucks. and you can double check me inthe rear end topic right above this one in engine and drivetrain

u have crushed my hopes and dreams :lolhit:

 

[PuckkcuP]

i'm sorry! i want one too! i'm getting ready for a motor swap and i'm gonna need one. trust me it hurt cause i crushed alot of dreams my friend

 

[La Colorado]

i'm sorry! i want one too! i'm getting ready for a motor swap and i'm gonna need one. trust me it hurt cause i crushed alot of dreams my friend

meh fuk it.......mine is holding up very well....and from what i have seen these rear ends can take abuse!!!!

txcoloradoss had a 5.3L H.O fully bolt on with a stall and a cam with 150shot of No2 on the stock drive shaft AND stock rear with the G80 (only took out the 3.42s and put in 4:10s)


and the dam thing STILL held up!!! IDK were talking 400+HP their........and he drives the shit out of that truck!!!! lol

 

[PuckkcuP]

well i know the only thing i have trouble with is i snap u joints every now and then lol. but thats to be expected. cause i'ma fan of driving the shit out of my truck too. talk to a couple people from ohio lol they know how i drive

 

[La Colorado]

well i know the only thing i have trouble with is i snap u joints every now and then lol. but thats to be expected. cause i'ma fan of driving the shit out of my truck too. talk to a couple people from ohio lol they know how i drive

haha same here but i have yet to snap a u-joint!!! (knocks on wood) and i am a regular at the local track!!! with the 20s and a built transmission i have gone through 1 u joint in 2,000miles lol

 

[PuckkcuP]

not bad. i haven't been out at the track too much. but i do street race on weekends. but i've put alot more than 2000 hard miles on the truck. i'm sittin at nearly 80k on it now. all of those have been some pretty hard miles on the truck

 

[rangerbob]

Gm 8" != aam 8"

 

[1BADI5]

Gm 8" != aam 8"

Not again Rob...:lol2:

 

[rangerbob]

Apparently nobody pays attention. :shrug:

 

[PuckkcuP]

hey i was trying. the only reason i knew it wouldn't work is cause what you guys were fussin back and forth about yesterday

 

[txcoloradoss]

meh fuk it.......mine is holding up very well....and from what i have seen these rear ends can take abuse!!!!

txcoloradoss had a 5.3L H.O fully bolt on with a stall and a cam with 150shot of No2 on the stock drive shaft AND stock rear with the G80 (only took out the 3.42s and put in 4:10s)


and the dam thing STILL held up!!! IDK were talking 400+HP their........and he drives the shit out of that truck!!!! lol

If mine break's anytime soon I am going to blame it on you :gtfocry: