Anyone figure out what upper hose to use on these trucks with a bodylift and the rad in the stock position?Or should I go with a lame and cheap looking universal hose?I was thinking of putting a piece of stainless exhaust pipe in the middle of the stock hose to get the length needed to put it back to a stock location.Thoughts?
Racer X
I went to the local parts store and took mine in with me... Found one that had the same diameter for it and put it on it was about 6 inches longer than the stocker and bendable with the springy thing in it.
Well speaking as a parts professional your best bet is to take the hose off and take it to your local parts store and try to match one up.
i used a universal and kept the rad at the stock location. i just found a hose my shop supplied that looked to fit the bends i needed. been on there for almost a year w/o issue
I'll see what I can find friday after work.Always hated those drop brackets and wanted to lose them.Then I can bolt the AC condenser back to the stock location too.Thanks for the info all.:thumbup:
Damn, thats some leisure time for ya then! LOL Glad you got her done brother. And THANKS for posting up part number's!!
For sure on the part number but I no longer have the stock radiator... So I bet it wouldn't help me out.
should have asked me luis I left my rad in the stock position when I did my BL we stock a hose that is almost identical to the OE but longer. its off another vehicle but it works!
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
