Looks awesome, hope all this gear can be found in my country.

 

I think there are quite a few guys using Ultragauge. A lot of guys use Scangauge. Keep in mind how you will mount it. The selector buttons are on the back of the unit.

 

They are awesome. Dont hesitate to buy.

 

I have a Scangauge.
CanyonAB has an ultragauge now - PM him and get him to post here. He said he liked it when I saw him over the summer.

 

Ive owned both and the ultraguage is much nicer, smaller and easier to use and read.

 

That's more or less what CanyonAB said this summer.
And they're 1/2 the price or something like that.

 

think about how you're gonna use it. Since i lifted it, i paid attention to my revs more so to save gas as well as it being convenient to be an OBDII DTC reader. Here in Cali, i have to ask homies on the downlow to scan my obd if i have a problem. It costs to pull up codes now in cali, which sucks. i mounted it under the pillar on the dash. easy to see and reach and had all the gauges i needed it to read. now that i got it, also helps me save gas. I'm sure ultra gauge is just as good, not being bias, but if some people like here said they've own both and prefer the ultra gauge over the SG, then go for it. i think the ultragauge is $60 cheaper tho

 

have one and use it daily, very nice easy to set up.

 

I have it too, no problem with it and it has all the necessary data you'd be interested in reading about your truck.

 

Ultragauge works fine on my V8.

 

So does it or does it not do trans temp because I would like to see that when towing and wheeling

On there site it says it does not but just wondering

 

Think I'll be investing in the near future! Does it show the fuel mileage like the scangauge?

Sent from my ADR6325

 

Think I'll be investing in the near future! Does it show the fuel mileage like the scangauge?

nevermind. I did a little reading, and it says it does. I wasn't paying any attention, as I'm at work. HEHE.

 

well it does but they will not change it till every one can so im not waiting i installed a trans temp

 

i have the UG. i have been using it in my car for a while now, since my cluster took a shit. the UG shows my speed, rpm, ECT, IAT, fuel level, and distance to empty. not really sure how it figures the fuel level, being that the car is a 97, but its pretty close to true.

 

Ultragauge does display mileage. Per trip, instant and average. It says on the web site what it will display.

I don't know exactly how accurate it is, I filled up last night with close to a gallon more than it said I used. Sure there will be some inaccuracy's between fillup amounts, but a gallon?

Anyway, it's probably inside of the same gallon MPG though. Mine said 15.3, I'm sure I was someplace in 15 MPG. I adjusted mine for proper speed since my wheels are over stock size. It will not change the dash display, so this is my speedometer.

I believe the UG says it will display trans temp on some vehicles, and I think somebody from here has the new one that does. Mine doesn't though, it was before the latest release.

 

also, UG does have its own forum if anyone needs more help with one. it should still be listed on their site

 

Dam I didnt even know about ultraguage. I just bought a scangauge and a mount for my truck... :shrug:

 

:gd: JW.....


lol. where were you when i got mine? oh yea, 4 trucks down!! :lol:

 

Funny guy... :hulk: We'll see how I like it I guess!

 

I was going back and forth between the scan gauge and ultra gauge, finally decided on the scan gauge only cause it would be easier to mount more places cause the ultra gauge has the buttons on the back which limits where you can put it, does look nicer though


Sent from my Autoguide iPhone app

 

yea. placement can be fun. i put mine up top corner of the windshield using the suction cup mount. works good there, and with the 5% tint strip, you can not see the UG from the out side.

 

:lol:

 

this is a scangauge mount a local company here sells... helps you mount anywhere.

check the vids too

ScanGauge II - Dash Mount Bracket (Polished Billet Aluminum)

 

thye also got a windshield mount that's cheaper OP so if you need any of these those would work

ScanGauge II - Windshield Mount Bracket

 

can you take the ug out of 1 vehical to another to check codes and then put it back in the 1st vehical.

 

i've switched it from the truck to the car and back. it just takes longer to load up as it scans the pcm to see what it can display.

 

thanks crazyeyes

 

I have a Scan Gauge mounted on the top of my steering column. I like it a lot.
it shows me what i want and clears codes.

 

UltraGauge Forum - Index

check out here, sure you can find answers